Schneckenmotor *Das Original* S1 & S2 - Set Selection of bearing:plastic bearing The "top" deflection plate with

The "top" deflection plate with burn-through slot is located above the heat exchanger tubes under the ribbed cast iron cover

Rauchgase und Wärme nach hinten und zum Schornstein zu leiten

Connection thread medium (60mm)

Nur für Kaminöfen mit Schublade (Aduro 1

Bitte wählen Sie Ihren Ofentyp aus

Schneckenmotor *Das Original* S1 & S2 - Set Selection of bearing:plastic bearing The "top" deflection plate withAuger motor with lower bearing (either bronze or plastic) and centering plate. This auger motor is the successor to the factory installed auger motors in the above mentioned pellet stoves with S1 and S2 control. Important: For operation with devices using S1 or S2 controllers, the Additional electronics ZE01 is absolutely required if it is not already present! When replacing a motor, we recommend replacing the lower bearing. If the centering plate is