headstock bearings honda xl100 xl 100 1978 1982 Honda XR75 It has 55mm centre to

It has 55mm centre to centre mounting points and one spade connector

This set of carburettor to head intake / inlet rubber manifold rubbers have been manufactured to replace the original set on a Honda CB500 for the years and models shown above

This ignition coil set has been manufactured to upgrade original / standard coils or replace Dynatek coil packs on a Kawasaki GPZ600 for the years and models shown above

Honda CRF 110 F (2013-2014)

Please check that your mounting matches 100mm prior to purchasing as most XJ models will have 90mm mounting

headstock bearings honda xl100 xl 100 1978 1982 Honda XR75 It has 55mm centre toBrand new set of headstock steering bearings to fit: Honda XL 100 S (1978 1982). This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Honda XL100 for the years and models shown above. Top sized: 22. 5mm x 41mm x 12mm. Bottom sized: 24mm x 41mm x 12mm. All sizes set out ID x OD x Thickness. The top and bottom steering bearings are included. The seals are not included.