headstock bearings and seals suzuki rm80 rm 80 1983 1989 Yamaha YW125 Honda CB 650 SC Custom

Honda CB 650 SC Custom (1980-1984)

This fuel tap has been manufactured to replace the original petrol tap on a Vespa PX150 for the years and models shown above

This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on an AX1 for the years and models shown above

This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Honda CR80 for the years and models shown above

5 ohm (primary) coil so you may need to remove the resistor to run these coils

headstock bearings and seals suzuki rm80 rm 80 1983 1989 Yamaha YW125 Honda CB 650 SC CustomBrand new set of headstock steering bearings and seals to fit: Suzuki RM 80 H (1983 1985). Suzuki RM 80 X (1986 1989). This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Suzuki RM80 for the years and models shown above. Top sized: 25mm x 48mm x 12mm. Bottom sized: 27mm x 48mm x 13mm. All sizes set out ID x OD x Thickness. The seals are not included in the